Parker Pneumatic Timer 8 bar max | PRT-C10

Name: Parker Pneumatic Timer 8 bar max | PRT-C10
SKU: 884-014
Availability: InStock

1 ₫

Điện thoại/ Zalo tư vấn: 0921.811.784
* Chất lượng: Mới 100%
* Bảo hành: Chính hãng
* Chứng từ : CO/CQ, hóa đơn VAT

Đã bán: 3 pcs

Mfr. Part No: PRT-C10

Đánh giá: ⭐⭐⭐⭐⭐

SKU: 884-014 Categories: Parker, Pneumatic Counters, Pneumatic Timers

Description

Specifications

Attribute	Value
Brand	Parker
Product Type	Pneumatic Timer
Hazardous Area Certification	EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X
Mount Type	Surface, Flush, DIN Rail, Clip
Minimum Operating Pressure	3bar
Maximum Operating Pressure	8 bar
Minimum Operating Temperature	-15°C
Maximum Operating Temperature	60°C
Standards/Approvals	EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982)

Product Details

Parker Pneumatic Timer

The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This OFF delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.

Note:

All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.