Burkert Solenoid Valve 053188, 2 Port, NC, 230 V ac 1/4 in G, 6.35 mm | 053188
1 ₫
Điện thoại/ Zalo tư vấn: 0921.811.784
* Chất lượng: Mới 100%
* Bảo hành: Chính hãng
* Chứng từ : CO/CQ, hóa đơn VAT
Đã bán: 13 pcs
Mfr. Part No: 053188
Đánh giá: ⭐⭐⭐⭐⭐
Specifications
| Attribute | Value |
|---|---|
| Brand | Burkert |
| Product Type | Solenoid Valve |
| Supply Voltage | 230 V ac |
| Number of Ports | 2 |
| Inlet Port Size | 1/4 in G |
| Default Valve Position | NC |
| Outlet Port Size | 6.35 mm |
| Outlet Connection Type | Threaded |
| Inlet Connection Type | Threaded |
| Inlet Thread Standard | G |
| Orifice Diameter | 4mm |
| Application | Fuel, Hydraulic Oil, Steam, Water |
| Body Material | Brass |
| Series | 0255 |
| Inlet Port Gender | Female |
| Outlet Thread Standard | G |
| Outlet Port Gender | Female |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Pressure | 12 bar |
| Maximum Operating Temperature | 55°C |
| Servo Assist | Yes |
| Standards/Approvals | No |
| Hazardous Area Certification | No |
| Maximum Closing Time | 30ms |
| Maximum Opening Time | 20ms |
| Flow Factor Kv | 0.5m³/h |
Product Details
Series 255 Two Way Normally Closed Solenoid Valves
For use with water, steam, air, gasses, hot oils and hydrocarbons, alkaline washing agents
Heat-resistant slip-over epoxy encapsulated coil
Brass body and PTFE Seal
Three-pin DIN connector rated to IP65 can be positioned 360° in 90° increments
Fluid temperature range to 180°C (130°C with fitted cable plug)
Ambient temperature +55°C maximum
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
