Burkert Solenoid Valve 134434, 2 Port, NC, 24 V dc | 134434
1 ₫
Điện thoại/ Zalo tư vấn: 0921.811.784
* Chất lượng: Mới 100%
* Bảo hành: Chính hãng
* Chứng từ : CO/CQ, hóa đơn VAT
Đã bán: 11 pcs
Mfr. Part No: 134434
Đánh giá: ⭐⭐⭐⭐⭐
Specifications
| Attribute | Value |
|---|---|
| Brand | Burkert |
| Supply Voltage | 24 V dc |
| Product Type | Solenoid Valve |
| Number of Ports | 2 |
| Default Valve Position | NC |
| Orifice Diameter | 20mm |
| Application | Neutral Media |
| Series | 5282 |
| Body Material | Brass |
| Minimum Operating Temperature | 0°C |
| Maximum Operating Pressure | 10 bar |
| Maximum Operating Temperature | 55°C |
| Servo Assist | Yes |
| Standards/Approvals | CGA/AGA, UL, UR, CSA |
| Hazardous Area Certification | EEx m, ed, Hazardous location |
| Maximum Opening Time | 0.8s |
| Flow Factor Kv | 6.5m³/h |
| Maximum Closing Time | 4s |
Product Details
Two-Way General Purpose Solenoid Valves, Type 5282
The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of challenging applications.
Features and Benefits
Less sensitive to dirty fluids and corrosion resistant due to separating diaphragm;Suitable for use with neutral gases and liquids;Long-life solenoid system;High reliability;Opening and closing times controlled by integrated restrictor screws;Lockable manual override as standard;NBR seal material;Protection to IP65
Product Application Information
This range of Burkert solenoid valves satisfys the European standards for drinking water.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
