HOBUT 3 Phase Energy Meter Calibrated | C-TRAN-160A

The C-Tran is a combined 3 phase multi function AC power transducer and a 3 phase current transformer in one. The meter is fully programmable through either of the two communication ports. The C-Tran can replace traditional multi function meters and 3 separate current transformers with this all-in-one product with RS485 output.

• RS485 output

• Non-volatile EEPROM memory for storing energy registers, current and voltage ratios and calibrated data

• 2 communication ports

• Accuracy class 0.2 to IEC688

• Multiple installation options

• 3 phase current options; 100A (914-5357), 160A (914-5351) and 250A (914-5360)

The port has a fixed data format that can also retrieve measurements and set the transducer operating parameters. Only the baud rate and endian format can be changed on this port.

The port is used as the main communication port. It uses Modbus protocol to retrieve measurements and change the transducer operating parameters. It also enables the connection of a host computer, PLC, RTU or Data logger.

• Phase Voltage (V)

• Line Voltage (V)

• Phase Current (I)

• Frequency (Hz)

• Active Power Per Phase (W)

• System Active Power (W)

• Reactive Power Per Phase (VAr)

• System Reactive Power (VAr)

• Apparent Power Per Phase (VA)

• System Apparent Power (VA)

• Import Active Power (W.h)

• Import Reactive Power (VAr.h)

• Apparent Energy (VA.h)

• System Power Factor (P.F.)

• Amp Demand (Ad)

• Maximum Amp Demand (Max.Ad)

• Import Watt Demand (Wd)

• Maximum Watt Demand Import (Max.Wd)

• VA Demand (VAd)

• Maximum VA Demand (Max. VAd)

• Neutral Current

• Hours Run—Voltage based