ifm electronic, N0 Series Amplifier for Use with Sensor, CE Certified Standard | N0537A

A range of SMT and through hole mount LED Poke-In receptacle connectors with a low profile designed for lighting applications. These PCB mount LED Poke-In LED connectors are side by side stackable with pads on 4mm centres and have UL 94V0 high temperature resistant thermoplastic housings that are coloured black or white for polarity with rounded corners to minimize shadowing. The socket contacts of these LED Poke-In connectors are made from tin over nickel plated copper alloy and accept 18, 20 and 22 AWG solid wire, 18 and 20 AWG pre-bonded stranded wire and 18 AWG stranded wire. Typical applications for these PCB mount LED Poke-In LED connectors include LED lighting controls, illumination of LED fixtures, interconnecting strings of PCB LED light modules and non-lighting applications that require attaching flying leads to PCBs.
Stock numbers 686-1898 (black), 686-1937 (white) are standard Poke-In LED connectors

UL 94V-0

The ifm electronic switching amplifier for Namur sensors is designed for short-circuit and wire monitoring. It operates at 24 V DC with an operating voltage tolerance of -15% to +25%, and has a current consumption of less than 50 mA. The device features one channel with two digital PNP outputs. Each output has a maximum voltage drop of 3.5 V and can handle a maximum current load of 100 mA.

Switching frequency DC 5000 Hz
Short-circuit proof

TE Connectivity SMT and Thru-Hole Poke-In Wire Lighting Connectors