Telemecanique Sensors XY2CE Rope Pull Switch, 70m, NO/NC | XY2CE6A270

Name: Telemecanique Sensors XY2CE Rope Pull Switch, 70m, NO/NC | XY2CE6A270
SKU: 9780-031
Availability: InStock

1 ₫

Điện thoại/ Zalo tư vấn: 0921.811.784
* Chất lượng: Mới 100%
* Bảo hành: Chính hãng
* Chứng từ : CO/CQ, hóa đơn VAT

Đã bán: 8 pcs

Mfr. Part No: XY2CE6A270

Đánh giá: ⭐⭐⭐⭐⭐

SKU: 9780-031 Categories: Rope Pull Switches, Telemecanique Sensors

Description

Specifications

Attribute	Value
Brand	Telemecanique Sensors
Normal State Configuration	NO/NC
Cable Length	70m
IP Rating	IP66
Number of Poles	DPST
Series	XY2CE
Range	Preventa XY2
Length	229mm
Width	105mm
Depth	142mm
Housing Material	Stainless Steel
Maximum AC Voltage	240V
Maximum Operating Temperature	+70°C
Maximum DC Voltage	250V
Standards Met	CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Conduit Entry	PG13.5
Dimensions	229 x 105 x 142mm
Minimum Operating Temperature	-25°C

Product Details

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.